Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Chesapeake Homeowners
A garage door that’s off its track, sagging at the panels, or running on an opener that no longer lifts it can trap your car, leave the house open, and turn a normal morning into a scramble. When repair no longer makes sense, we handle the whole replacement – measurement, door selection, removal of the old unit, and installation – so you’re not calling around to find someone who’ll take the job. Our technicians have up to 15 years of experience, and we’re factory-familiar with the hardware on eight of the most common residential brands, including Amarr and Wayne Dalton. We quote a written price before any work starts, and we book installations around your schedule. Call (866) 476-9023 for a free estimate in Chesapeake.
What Our Garage Door Installation Service Includes
Installation isn’t one job. A single-car door on a tight budget, a custom wood carriage door on a new build, and a double door in steel for a family that parks two cars all take different planning. Here’s how we break it down.
New Door Installation
New door installation means removing the existing door and hardware and fitting a complete new unit: panels, tracks, springs, rollers, hinges, and the opener connection if you’re keeping or replacing it. You need this when the door has reached the end of its useful life, when a failed panel or bent track can’t be repaired economically, or when you’re finishing a renovation and want the door to match. We measure the opening ourselves rather than relying on a model number, check that the header and jambs are sound, and confirm the spring is balanced to the door’s actual weight before we call the job done.

Single Car Door
A single car door is the standard 8- or 9-foot-wide residential opening, and most Chesapeake homes with a one-car bay use this size. It’s the right choice when you have limited clearance, a narrow driveway, or a garage that only needs to shelter one vehicle. We fit single doors in steel, wood, and insulated configurations, and we match the spring tension to the lighter panel weight so the door opens smoothly by hand and doesn’t strain the opener.

Double Car Door
A double car door spans roughly 16 feet across and covers two bays in one opening. It’s what you need when your garage has a wide face and you want fewer moving parts than two separate doors, or when the layout doesn’t leave room for a center post. Double doors weigh considerably more than single ones, so we size the torsion springs and verify the track is properly anchored before the door goes up. Get the weight balance wrong on a door this size and the opener wears out fast.

Custom Garage Door
Custom garage doors are built to a non-standard width, height, or design and ordered for your opening specifically. You need one when the garage was framed to unusual dimensions, when the house has a distinctive facade you want the door to match, or when you’re replacing a door that was never a stock size to begin with. We take the measurements, walk you through what’s available in your dimensions, and handle the order and install so the door arrives ready to fit.
Steel Doors
Steel is the most common residential door material, and it’s a good fit for Chesapeake’s humidity and summer heat because it doesn’t swell or warp the way wood can. Steel doors are the right pick when you want low maintenance, a clean painted finish, and a door that holds up to daily use without much fuss. We install steel doors in a range of panel styles and insulation levels, and we check that the bottom seal sits flush so driving rain doesn’t get under the door.
Wood Doors
Wood garage doors bring warmth and character that steel can’t match, and they suit older homes and custom builds where the door is part of the look. You’d choose wood when the architecture calls for it or when you want a finish that can be stained and refinished over time. Wood needs more attention in our climate – it moves with moisture and needs periodic sealing – so we talk through the upkeep before you commit, and we make sure the door is hung square so it doesn’t bind as the seasons change.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on Amarr equipment regularly, and we know how their panel profiles and spring assemblies are put together, which matters when you’re matching a new door to an existing opening or replacing a worn unit. We also service Wayne Dalton doors and openers, including the models that use their proprietary hardware – those parts don’t always cross over to other brands, so it helps to have someone who’s seen them before. Knowing the quirks of a specific brand saves time on the install and cuts down on callbacks.
The same goes for Craftsman and Raynor. Craftsman doors and openers show up on a lot of older Chesapeake homes, and we know where those units tend to wear and what to check before we recommend replacement over repair. Raynor builds sturdy commercial-grade residential doors, and we’ve fitted and adjusted them enough to understand their track and roller setup. Whether you have Amarr, Wayne Dalton, Craftsman, Raynor, or any other make, we can help.
Signs You Need Garage Door Installation Right Now
- The door is visibly sagging or bowed. A door that dips in the middle or looks warped across the panels has usually lost structural integrity, and repair often costs more than it’s worth. A new door restores a straight, even line and keeps the weather out.
- Panels are cracked, rusted through, or separating. Once a panel fails, water gets inside and the damage spreads. If more than one section is compromised, replacement is usually the more sensible route than chasing panel after panel.
- The door is off its track and won’t sit flush. A door that hangs crooked or won’t close all the way leaves a gap at the bottom, and that’s an open invitation to weather and pests. Sometimes a track realignment fixes it; sometimes the door itself is bent beyond saving.
- The opener strains or the door is hard to lift by hand. If the door feels heavy when you disconnect the opener and lift it manually, the springs are undersized or the door is out of balance. A properly matched new door and spring set takes the load off the opener.
- Your energy bills and drafts are climbing. An old uninsulated door lets heat in during summer and out during winter, and a worn bottom seal makes it worse. An insulated replacement door helps hold the garage temperature and cuts down on noise from outside.
Our Garage Door Installation Process – Step by Step
- 1
We measure the opening and check the structure. We take the actual width and height of the opening, check that the header and jambs are solid, and confirm the ceiling height and headroom for the tracks and springs. This is where most installation problems get caught early – guessing at dimensions is how doors arrive wrong.
- 2
We walk you through door options and give you a written price. Based on your measurements, budget, and material preference, we lay out what’s available in steel, wood, single, double, or custom. You get the price in writing before anything is ordered, so there are no surprises later.
- 3
We order the door and schedule the install. Installation work is measured, ordered, and scheduled – it’s not a same-day repair. Once the door comes in, we set a date that works for you and confirm what we’ll need access to on the day.
- 4
We remove the old door and install the new one. The old panels, tracks, and hardware come down, and we fit the new door, set the tracks plumb, hang the panels, and install the torsion springs. We balance the door by hand before connecting the opener so the lift is smooth and even.
- 5
We test everything and clean up. We run the door through full open and close cycles, check the safety reverse, adjust the travel limits, and confirm the bottom seal sits flush. Then we haul away the old door and leave the garage clear.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Chesapeake?
A typical new door installation in Chesapeake runs $700 to $2,200, depending on the size of the door, the material, and how much prep the opening needs. A single car door in steel sits toward the lower end of that range, while a double door, an insulated model, or a custom wood door lands higher. If you’re also replacing the opener at the same time, opener installation runs $250 to $550 on top of the door price.
What affects the price most is door size and material, insulation level, and whether the opening needs any adjustment before the new door goes in. Custom sizes and wood doors cost more because they’re built to order and take longer to arrive. You avoid overpaying by getting a written estimate that lists the door, the hardware, and the labor separately, and by confirming what happens to the old door – removal and haul-away should be spelled out, not assumed.
Every free estimate includes the on-site measurement, a clear walkthrough of your options, and a written price. The estimate is the price: we quote it and you agree to it before any work starts. Call (866) 476-9023 for a free estimate.
Garage Door Installation Near Chesapeake – Our Service Area
We serve homeowners across Chesapeake and the surrounding communities, including Portsmouth, Virginia Beach, Norfolk, Suffolk, Hampton, Windsor, Smithfield, and Bethel Manor. If you’re just outside those areas, in Carrollton, Benns Church, or Carrsville, we can still help – call and we’ll confirm coverage. Installation is scheduled by appointment rather than same-day, and we’ll give you a clear window when we book it. You can also read more about Chesapeake Garage Door Repair Co if you’re new to us.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Chesapeake
Garage door installation is the full replacement of your existing door and its hardware with a new unit – panels, tracks, springs, rollers, and hinges – measured to fit your specific opening. It’s different from a repair, which fixes a single failed part on a door that’s otherwise sound. We handle the measurement, the door order, the removal of the old unit, and the install in one job. If you’re weighing repair against replacement, call (866) 476-9023 and we’ll tell you honestly which one makes sense.
A standard single or double door installation usually takes a few hours once the door is on site, and a custom or wood door can take longer depending on the complexity. The bigger factor is lead time – the door has to be measured, ordered, and delivered before we can install it, so the whole process from estimate to finished door spans more than a single visit. We’ll give you a realistic timeline when we quote the job. Call (866) 476-9023 to get started.
New door installation in Chesapeake typically runs $700 to $2,200, with the final price depending on door size, material, and insulation. A single steel door sits near the bottom of that range; a double, insulated, or custom wood door sits higher. Adding an opener brings another $250 to $550. The written estimate sets the final price, and you agree to it before we order or install anything. Call (866) 476-9023 for a free estimate.
Yes, we service Amarr and Wayne Dalton equipment, along with Craftsman and Raynor. We know how each brand’s panels, tracks, and spring assemblies are built, which helps when we’re matching a new door to your opening or replacing a worn unit. That familiarity cuts down on install problems and callbacks. If your door is one of those brands, mention it when you call so we can plan accordingly – (866) 476-9023.
Installation itself is scheduled work, not same-day, because the door has to be measured and ordered first. But if your door has failed and you’re stuck – car trapped, garage open, door off its track – we offer emergency garage door service to get you secured while the replacement is arranged. Call (866) 476-9023 and we’ll sort out the immediate problem and the replacement plan together.
Warranty coverage depends on the door manufacturer and the specific model you choose, and it’s separate from any workmanship coverage on the installation itself. We’ll go over what the manufacturer covers and for how long when you pick your door, so you know what to expect before you commit. Ask us about it during the estimate and we’ll put it in writing. Call (866) 476-9023 with questions.
Clear the garage floor and the area in front of the door so we have room to work, and move anything hanging from the ceiling near the tracks. If your opener is staying, make sure we can reach the outlet and the motor unit. Park your cars outside the garage for the day, and plan for the door to be out of service while we work. That’s usually the only prep you need – call (866) 476-9023 if you’re unsure about anything.
Schedule Your Garage Door Installation Service in Chesapeake Today
Whether you’re replacing a door that’s finally given out or upgrading to something insulated and better looking, we’ll measure it, quote it in writing, and install it without handing you off to someone else. Our team handles new doors, custom sizes, steel, wood, single, and double configurations across Chesapeake and the surrounding area. Call (866) 476-9023 for a free, no-obligation estimate and let’s get your new door ordered.
Written by the team at Chesapeake Garage Door Repair Co.