Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Chesapeake?
Spring replacement in Chesapeake typically costs $180 – $340 for one spring when we handle the repair as a single job. Most doors use a matched pair of springs, and since they wear at the same rate, both usually get replaced together, which puts a pair at roughly double that range. The written estimate you get before any work starts is the price that holds.
That range covers the spring itself, the labor to tension and set it safely, and the safety check that follows. A torsion spring and an extension spring are priced differently because they’re different jobs, so the quote depends on which system your door uses. Call (866) 476-9023 for a free estimate and you’ll know what your door needs before anyone touches it.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: about twice that range.
- Torsion springs usually cost more than extension springs because the swap takes longer and carries more risk.
- Emergency calls cost more than scheduled ones. A snapped spring on a Sunday is not the same job as a planned replacement on a weekday.
- The written estimate sets the final price. We don’t quote one number and bill another.
- Our technicians have up to 15 years of experience with high-tension spring work.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers land for a typical residential job in Chesapeake. These are estimated ranges for 2026, and the written estimate you receive is what sets your actual price.
| Job | Typical Estimated Range |
|---|---|
| One torsion spring, replaced | $180 – $340 |
| One extension spring, replaced | $180 – $340 |
| Matched pair (both springs together) | About twice the single-spring range |
| Cable repair alongside the spring swap | $130 – $250 |
| Track realignment if the door shifted | $120 – $240 |
| Roller replacement while we’re in there | $110 – $220 |
| Full garage door repair unrelated to springs | $150 – $600 |
What pushes a job up or down? The spring type matters most. Torsion springs sit on a shaft above the door and store far more energy than the extension springs you’ll find on older single-car doors, so a torsion swap takes more steps and more care. Door size and weight come next: a wide, insulated double door needs heavier springs than a basic single. If the door came off its track or a cable frayed when the spring let go, that’s extra work and it shows up in the quote. A scheduled weekday job on a door that’s still hanging normally sits at the low end. Emergency work, seized hardware, or a retrofit to torsion from extension moves it toward the top.
What Affects Spring Replacement Pricing in Chesapeake
Chesapeake is a big city with a wide mix of housing, and the door on a 1990s two-car in Great Bridge is a different job from the one on a newer build out toward Grassfield. A few local factors shape the price:
- Spring type and system. A torsion spring replacement runs higher than an extension spring swap, and if the door currently uses extension springs but is sized for torsion, converting adds cost. The layout of your door tells us which system you have in about a minute.
- Door weight and size. Insulated doors, carriage-house styles, and wide double doors need heavier springs. Heavier springs cost more and take more torque to set, so plan for the upper part of the range.
- Emergency timing. A spring that snaps while your car is trapped or a door that won’t close for the night is an emergency call, and emergency garage door service is a different job from a scheduled one. Non-standard hours carry a premium. If a door fails on a Saturday, we’re closed that day, but call and we’ll book you for Sunday.
- Humidity and heat swings. Hampton Roads summers are humid, and the seasonal temperature swing from a muggy July to a frosty January works any steel spring harder over its life. That’s why we check spring tension and balance on every visit and flag a spring that’s on its way out before it breaks.
- What else the door needs. A spring that lets go often takes a cable with it, or knocks the door slightly off its track. Cables ($130 – $250), track realignment ($120 – $240), and rollers ($110 – $220) all get quoted as line items, never rolled into a vague lump sum.
- Brand and parts availability. We’re factory-familiar with eight of the most common residential door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Knowing your specific hardware means fewer surprise parts and less back-and-forth on the quote.
Is It Cheaper to Repair a Spring or Replace the Whole Door?
Repair almost always wins on cost. A spring swap runs $180 – $340 for one spring, while a full new door installation runs $700 – $2200. You only consider replacement when the door panels are bent or rotted, the door is beyond its safe working life, or you’re changing sizes. If the door still moves and only the spring failed, replace the spring. Call (866) 476-9023 and we’ll tell you honestly which one your door needs.
Why You Shouldn’t DIY a Spring Replacement
Garage door springs are stored energy under high tension. A torsion spring holds enough force to cause serious injury, and the winding bars and technique involved aren’t something to figure out from a video. We treat high-tension spring repair as its own discipline, and that’s why a lot of general handymen won’t touch it. This is a job for a trained technician. Our technicians have up to 15 years of experience, and the local pro who performs the work is licensed and insured as their state requires.
Here’s what you can check without putting your hands on the spring: how the door sounds, whether it lifts smoothly and evenly, and whether the door stays put when you lift it partway by hand and let go. Those checks tell you the spring may be tiring. Tensioning, winding, and swapping the spring itself is where the danger lives, so leave that to us.
How to Save on Spring Replacement in Chesapeake
A few practical moves keep the number down without cutting corners:
- Replace the pair, not the single. If one spring on a matched set breaks, the other one is the same age and has seen the same cycles. Swapping both at once means paying the labor once, not twice in a month’s time.
- Book the job before it becomes an emergency. A scheduled weekday replacement is cheaper than a call-out. If you hear the door get louder or feel it strain, get an estimate now.
- Bundle small line items. Rollers at $110 – $220 and cables at $130 – $250 cost less when they’re done during the spring job than on their own later.
- Get a written estimate first. Free estimates mean you know the price before work begins, so there’s no surprise when the invoice shows up.
- Ask about the brand. If your door is a Clopay, Amarr, Wayne Dalton, or Raynor, telling us up front helps us match the right spring and avoid a second trip.
Free estimates are always available, so call (866) 476-9023 and we’ll give you a flat number to work from.
How Long Does Spring Replacement Take?
A straightforward single-door spring replacement is usually done in a single visit, often the same day you call, depending on the season and the parts your door needs. Torsion swaps take a bit longer than extension swaps. If a cable or the track got damaged when the spring failed, that adds time because it’s a second job on the same door. Fast dispatch runs from 7am to 7pm, and every job comes with our satisfaction guarantee. A same-day slot is often possible when you call early.
What Brands Do We Work On?
We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That range covers most of the residential doors and openers in Chesapeake, which means we know the quirks of your specific hardware rather than treating every door the same. It also means the whole job stays with us. Springs, openers, panels, and full installation are all handled by one team, so nobody gets handed off to a subcontractor when the job gets harder. Whether it’s a door that won’t close at night or a full new-door swap, you’re calling the same place. See our full Chesapeake Garage Door Repair Co page for the complete range of work we cover.
When to Call vs. When to Wait
A broken spring leaves a door too heavy to lift or too dangerous to trust. If your door won’t open, hangs crooked, or won’t close, that’s a call today. If the door works but sounds louder or feels heavier than it used to, that’s a good time to get a free estimate and plan the spring replacement before it becomes a Saturday emergency. Our technicians have up to 15 years of experience reading those warning signs.
FAQs – Spring Replacement Cost in Chesapeake
How much does spring replacement cost in Chesapeake?
Spring replacement in Chesapeake typically costs $180 – $340 for one spring in 2026. If your door uses a matched pair and both need replacing, plan on roughly twice that range. The written estimate is the price you pay. Call (866) 476-9023 for a free quote.
Is it cheaper to replace one spring or both?
It’s usually cheaper over time to replace both at once. Swapping a single spring on a matched set means paying the labor again soon when the other one fails at the same age. Replacing the pair in one visit saves the second call-out. Call (866) 476-9023 and we’ll quote both options.
Can you come today for a broken spring?
Often yes. Same-day service is available on many spring jobs, and fast dispatch runs from 7am to 7pm. Emergency garage door service is core work for us, not an upsell. Call (866) 476-9023 early in the day for the best chance at a same-day slot.
How much does an emergency spring replacement cost in Chesapeake?
Emergency work sits in the upper part of the $180 – $340 single-spring range because non-standard hours carry a premium. A scheduled weekday job sits near the low end. Either way you get a written estimate before work starts. Call (866) 476-9023 for an exact figure.
Do I need a permit to replace a garage door spring in Chesapeake?
Spring replacement on its own typically doesn’t require a permit, but rules vary, so ask the city’s building department if you’re unsure. A full door replacement or structural track work may need one. Call (866) 476-9023 and we’ll point you to the right department.
Related Services
If your spring job turns out to involve more, we keep it all in one place. We handle garage door opener repair ($120 – $320), opener installation ($250 – $550), panel replacement ($250 – $500), and full door installation ($700 – $2200) alongside every spring call. No runaround, no hand-offs.
Get a Free Spring Replacement Estimate Today
We know the Chesapeake market and we quote it straight: one spring runs $180 – $340, a matched pair about twice that, and the written estimate sets the final price. Our technicians have up to 15 years of experience with high-tension spring work, and the local pro we connect you with is licensed and insured as their state requires. Fast dispatch runs from 7am to 7pm, free estimates are always available, and every job comes with our satisfaction guarantee. Call (866) 476-9023 for a free estimate today.
Pricing reflects the Chesapeake market as of 2026. Chesapeake Garage Door Repair Co offers free estimates – call (866) 476-9023.
Written by the team at Chesapeake Garage Door Repair Co.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Stephanie Padgett"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carrie Rhodes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Alma Torres